USB 4G Failover Netgear 341u:

USB 4G Failover Netgear 341u:

Image result for Sierra wireless 341u
Netgear 341u:

1.Connect the device to a Windows computer
2. Activate
4. Go to settings and disable Auto connect (Set to Manual)
5. Set to IP passthrough mode (Disable Nat/Router)
6. Save all settings

Set to 4G Netgear in SimpleWAN Dashboard for WAN or WAN2 (Follow Normal 4G Setup procedure from here)


    • Related Articles

    • OPT Port Failover

      Your SimpleWAN device supports failover to a secondary connection in the event your primary connection has an issue. You can easily add this feature by contacting your Reseller/support agent and asking them to activate the feature as it needs to be ...
    • USB 4G Failover - Sierra Wireless 340u

      Sierra Wireless 340u: Connect the device to a Windows computer Activate Run AC340U_Linux_Patch executable to put in IP passthrough mode. (Download here: ac340u_patch_v4.zip) Wait for the tool to complete. Set to 4G Sierra Wireless in SimpleWAN ...
    • USB 4G Failover -Pantech UML 290

      Pantech UML290: These instructions are for users who purchased their own Pantech UML 290. If you purchased the @Home Product, please follow the instructions here. When you have your 4G failover device, simply plug it into any USB port. You can use a ...
    • How to enable Failover / Load Balacing

      Please note: If the customer is a channel you can enable this by contacting support. Otherwise the user will need to contact Their reseller/distributor to enable this for them.  How to enable Failover / Load balancing 1. Make sure that you are on the ...
    • OPT Port Failover

      Your SimpleWAN device supports failover to a secondary connection in the event your primary connection has an issue. You can easily add this feature by contacting your Reseller/support agent and asking them to activate the feature as it needs to be ...