I Think I “bricked” my unit

I Think I “bricked” my unit

That's okay! It's very hard to do. Verify that the correct firmware version is listed in the dashboard, then use the pin hole reset on the box. Please, be careful not to wedge the paper clip or other object you are using to push into the pinhole under the reset button. You run the chance of breaking the button if you apply a lot of force while it is wedged. The other method would be to take the SimpleWAN off of the Internet entirely (nothing plugged into WAN or OPT) and plug a laptop or pc directly into the SimpleWAN's LAN port. Perform a Factory Reset.