PPTP Settings

You can enable or disable PPTP from here, and get the Dial In address. Unless you have VPN users, you should disable this for security.

Please keep in mind that PPTP is being Phased Out. This VPN service has been known for breaches and most ISP are now BLOCKING the service entirely. If the service no longer works for you like it used to, the ISP may have blocked the service already.

PPTP User List

Here you can see the list of VPN users, and add new users.

You can also disable users or delete them from here is well. 

How it Works

1) Enable the PPTP
2) Create the Credentials in the dashboard
3) Set up your PC for a VPN 
- PPTP only (not auto)
- Address should be the Dyn. DNS Address on this page or on the Site Overview page

4) Connect to the VPN
5) Use the Username and Password you created earlier.

    • Related Articles

    • VPN

      A Virtual Private Network (VPN) extends a private network across a public network, such as the Internet. It enables a computer or network-enabled device to send and receive data across shared or public networks as if it was directly connected to the ...
    • Using NCP for Dynamic IPSEC VPN connection

      get the Client, please download from: (https://www.ncp-e.com/en/service-resources/download-vpn-client/) Step 1: Create a Dynamic IPSEC Server. Visuals below can be used as guidelines for your initial attempt. Make sure that the IPSEC Server is ...
    • IPSEC

      IPSEC VPN can be used to create a Tunnel between devices. IPSEC settings must match on both units. For units that do not match (i.e. SimpleWAN unit to Cisco or Sonicwall) the settings between each unit is even more crucial. You may need to Switch to ...
    • VPN Connection Issues

      Make sure the unit is updated to the latest firmware release or higher. See if the box is co­existing with vmpls, dns, and other VPN's. Check the latency (Enable the 48 Hour Intensive Latency Test located under Diagnostics> Network Health > and ...
    • Dynamic IPSEC VPN Server

      Dynamic Server Alternative remote VPN; can be used by phones with remote VPN capabilities, remote desktop, etc.. The main use of dynamic vpn server is to create a Spoke and Hub Type 1 tunnel that allow users to remotely access their network and ...