DHCP Lease

This section will show you a client table of all devices currently receiving an IP address from the SimpleWAN device, its MAC Address, display when the device will renew its IP address and when it started, as well as the ID or Hostname of the Device connected.

You may also set up a quick Reservation of a device's IP address using the Reserver button to the right.

• Related Articles

• DHCP Server

  The DHCP menu allows you to configure the SimpleWAN LAN-side (Local Area Network) options. Here you will find the following settings: DHCP Servers DHCP Options DHCP Reservation List DHCP Lease This section will display your current DHCP range ...

• Interfaces (LAN, WAN, WAN2)

  Within this section inside of a given site, you are able to modify settings for the LAN, WAN, and WAN2 (when applicable) for the SimpleWAN device. Please be sure to update WAN settings when moving a SimpleWAN device to a new physical location or ...

• DHCP Options

  When adding additional options to the DHCP menu, you may select the Add icon. In this menu you will be given the ability to complete PXE (Preboot eXecution Environment) such as: Option 66 – “Next Server” is “tftp-server-name”. Option 67 – “Boot File” ...

• DHCP Reservation List

  The DHCP server allocates an IP address based on a preconfigured mapping to each client's MAC address when they are connected to the network. This is not the same thing as a static IP address, as static IP addresses are assigned manually and have to ...

• Load Balancing Rule to use only one ISP IP

  When using Load Balancing the SimpleWAN unit will use the IP with the most optimum connection to the website, server, etc. This sometimes causes conflict with devices such as phones or computers trying to reach a secure website. In order to use only ...