Managing SimpleWAN Device Features
How to edit a site
What you see
From here, you can change all site information, activate paid for features and change or update the firmware version.
Add-on Features
You can activate the following Add-On Features from here:
- WAN Failover/Load Balancing
- Cyber Security
- Content Filtering
- Ubiquiti Unifi Cloud Controller
- Software Defined Voice (SDV)
Other Details
SLA Start Date - if you are planning a future dated install, you may start the SLA Start date on the day of install. This will default to day of site creation if otherwise left alone.
Template - you can set this site to be a Template that can be used by the sites under this account. Templates are only available when you create a new site.
Is Global Template* - you can set this site to be a Template that can be used for ALL accounts
Not For Resale* - this is a tag given to Sites that are used for Demos; only one (1) per Reseller is available.
*These areonly available for distributor and higher level access only.
Related Articles
Content Filtering
Service Details Content filtering is an add-on service that can be enabled to allow for filtering of undesired content. It comes in three levels: low, medium, and high. They are detailed at the bottom of the page! It can be enabled on a given site ...UniFi Controller
The UniFi Controller is a dashboard add on that will allow you to connect and manage any UniFi access point connected to your SimpleWAN network. The setup of the device is fairly simple and you should be able to get the AP online within 10-15 ...OPT Port Failover
Your SimpleWAN device supports failover to a secondary connection in the event your primary connection has an issue. You can easily add this feature by contacting your Reseller/support agent and asking them to activate the feature as it needs to be ...OPT Port Failover
Your SimpleWAN device supports failover to a secondary connection in the event your primary connection has an issue. You can easily add this feature by contacting your Reseller/support agent and asking them to activate the feature as it needs to be ...USB 4G Failover -Pantech UML 290
Pantech UML290: These instructions are for users who purchased their own Pantech UML 290. If you purchased the @Home Product, please follow the instructions here. When you have your 4G failover device, simply plug it into any USB port. You can use a ...