SD WAN

SD WAN

SD WAN


Software Defined WAN (SD-WAN) is the simplified solution for daily Networking needs. It provides a piece of mind by reducing risks and hassles with a lower cost and ease of management by providing diverse solutions.


Load Balancing


Load Balancing provides a clear Dual WAN solution that allows both your ISP to simultaneously work actively. This delivers speed and a no drop answer to your Networking needs. The easy setup can be done right onto your SimpleWAN dashboard.

Failover


Failover, similar to Load Balancing, provides a Dual WAN solution for those who prefer to keep their secondary ISP in the back burner until necessary. It is a no drop solution that quickly switches you Primary and Secondary ISP rapidly. It has a wide variety of options to provide for those that wish to use this feature.


To set up Failover or know what your Failover options are, click here.


vMPLS


vMPLS takes your standard MPLS solution and makes it easier. Your multitude of sites are now easier to set up, easier to connect, and easier to maintain. The need for all sites to remain with the same ISP has been tossed out the window. Coupled with your Failover or Load Balancing, vMPLS will remain connected.


To learn how to set up the vMPLS, please click here





Software Defined Virtualization (SDV)


Software Defined Virtualization creates a secure connection between each of your locations to a specified server within your network. It prevents each location from interconnecting the same way as SD-WAN does to create a more secure Network. 

Software Defined Virtualization also provides an environment to allow your Failover or Load Balancing to keep your calls connected to your provider with no drop at all. The seamless switch between one ISP to another keeps the call going and your call quality at a good state.

For more information about SDV, click here



    • Related Articles

    • SD-WAN and Traffic Prioritization System

      Also known as packet prioritization system, this feature is a patented technology used to manage network traffic which delays some or all datagrams to bring them into compliance with a desired traffic profile. Traffic Prioritization is used to ...
    • vMPLS

      vMPLS Setting up vMPLS is a snap. From the Account page scroll down to the vMPLS Groups header. Click the plus + on the upper right. In order to be in the same vMPLS group, the devices will all need the same /16 LAN subnet. For example, in order to ...
    • Interfaces (LAN, WAN, WAN2)

      Within this section inside of a given site, you are able to modify settings for the LAN, WAN, and WAN2 (when applicable) for the SimpleWAN device. Please be sure to update WAN settings when moving a SimpleWAN device to a new physical location or ...
    • WAN Configuration (Static IP)

      This article will guide you through setting up the WAN information on the dashboard and this guide is also applicable, if you are trying to update new static IP on the WAN. 1. Firstly, you open up the dashboard of the site that you wanted to ...
    • Setup 4G Connection

      Here is how to set up the 4G USB device as the Primary connection for your SimpleWAN unit: Activate the correct supported failover card on a computer and connect to the Internet. Make sure the firmware is up to date and you can get online. Test on ...