Diagnostic Tools

Diagnostic Tools


Diagnostics will provide several options to evaluate the status of your network along with any changes, updates or degradation occurring with your hardware. You will have the option to view the following settings within the diagnostics view: 

Change Log

If you want to learn more on how to view all the changes made to a site,  click on  ---> Change logs


Firewall Log

Firewall logs will include: date of attack, type of entry, and a message stating: what IP was blocked, what type of traffic was blocked, what port it was blocked from entering, and the internal IP it was attempting to reach. Click this link learn more on how to view the full Data --> Firewall Log

If you want to learn more on how to view the  top IP address and port that it is constantly trying to attack and the number of times it has tried, Click -->  Site Attack Map


IP Monitoring

If you want to learn more on how to monitor a specific IP address and see if the link between the SimpleWAN unit and the IP cuts at any given time, Click the link -->  IP Monitoring


MOS History

If you want to learn more on how to view the phone activities, score on each call, jitters etc. Click the link MOS hitory


Network Health

If you want to learn more on how to check the status of your network, check the outages, run diagnostic tests Click this link --> Network Health

Packet Capture

If you want to observe and capture behavior of a specific IP for WAN or LAN like the headers, ports etc..  Click on this link learn more  --> Packet Capture


Speed Tests

If you want to see how well your internet is doing when in use in collaboration with our firewall, Click this link learn more --> Speed Tests

Sync Logs

If you want to learn more on how to check the timestamps and to monitor your firewall's live duration Click this link --> Sync Logs  

ISP Outage History

If you want to know if there's an ongoing outage or at least get the outage history if there's any, Click this link learn more on how-->  ISP Outage History

    • Related Articles

    • Basic and Advance View

      Basic View: In basic view you can only see eight main tabs, these are Site Overview, Diagnostic Tools, Security and Compliance, General Settings, DHCP Server, Interfaces, Firewall and VPN.  Advanced View To switch to Advanced View, you click on ...
    • IP Monitoring

      To access IP Monitoring: Enter the Site Under Diagnostic Tools select IP Monitoring IP Monitoring allows for pinging to any IP address from the router on a regular basis, alerting on failures (click the alert link conveniently located in the blue ...
    • OPT Port Failover

      Your SimpleWAN device supports failover to a secondary connection in the event your primary connection has an issue. You can easily add this feature by contacting your Reseller/support agent and asking them to activate the feature as it needs to be ...
    • VPN Connection Issues

      Make sure the unit is updated to the latest firmware release or higher. See if the box is co­existing with vmpls, dns, and other VPN's. Check the latency (Enable the 48 Hour Intensive Latency Test located under Diagnostics> Network Health > and ...
    • Network Health

      The Network Health selection is located within the Diagnostics section and can help a network administrator quickly review the overall performance of a network. From this area, you will be able to view interface status, IPSEC VPN status, perform a ...