How to enable Failover / Load Balacing

How to enable Failover / Load Balacing

Please note: If the customer is a channel you can enable this by contacting support. Otherwise the user will need to contact Their reseller/distributor to enable this for them. 

How to enable Failover / Load balancing


1. Make sure that you are on the Accounts tab where you see all the sites.
2. Look for the site that you wanted to enable the Feature and click on the pencil or edit button.



3. Scroll down and look for the Wan Failover / Load Balancing tab and select enable. Then scroll down at the botton and click save.



Setting up Failover / Load Balacing

1. Go to the site and select the Interfaces tab and then select WAN2



2. Check mark enable and choose the WAN2 mode. (Failover or Load Balancing)

3. .Then select the WAN Type.
Please see description of the WAN type by hovering your mouse to the question mark icon



4. Power Cycle/Reboot the SimpleWAN unit to calibrate the new connection.

5. Check the Speed Test if the WAN2 has been recognized and activated.



Other Failover setups:



    • Related Articles

    • Interfaces (LAN, WAN, WAN2)

      Within this section inside of a given site, you are able to modify settings for the LAN, WAN, and WAN2 (when applicable) for the SimpleWAN device. Please be sure to update WAN settings when moving a SimpleWAN device to a new physical location or ...
    • OPT Port Failover

      Your SimpleWAN device supports failover to a secondary connection in the event your primary connection has an issue. You can easily add this feature by contacting your Reseller/support agent and asking them to activate the feature as it needs to be ...
    • OPT Port Failover

      Your SimpleWAN device supports failover to a secondary connection in the event your primary connection has an issue. You can easily add this feature by contacting your Reseller/support agent and asking them to activate the feature as it needs to be ...
    • USB 4G Failover -Pantech UML 290

      Pantech UML290: These instructions are for users who purchased their own Pantech UML 290. If you purchased the @Home Product, please follow the instructions here. When you have your 4G failover device, simply plug it into any USB port. You can use a ...
    • Load Balancing Rule to use only one ISP IP

      When using Load Balancing the SimpleWAN unit will use the IP with the most optimum connection to the website, server, etc. This sometimes causes conflict with devices such as phones or computers trying to reach a secure website. In order to use only ...