DHCP Server

DHCP Server

The DHCP menu allows you to configure the SimpleWAN LAN-side (Local Area Network) options. Here you will find the following settings:

This section will display your current DHCP range available for assignment, as well as the LAN IP address of the SimpleWAN device. This example shows the LAN IP as (Default).   See  Interfaces  to  Modify the router’s LAN IP address as well as the Subnet Mask.

By selecting the Edit icon, you will be provided additional options such as:

  • Turning on/off DHCP
  • MAC (Media Access Control) Filtering
  • Adjust the DHCP Range
  • Adjust the Default Lease Time
  • Adjust the Maximum Lease Time

    • Related Articles

    • DHCP Options

      When adding additional options to the DHCP menu, you may select the Add icon. In this menu you will be given the ability to complete PXE (Preboot eXecution Environment) such as: Option 66 – “Next Server” is “tftp-server-name”. Option 67 – “Boot File” ...
    • DHCP Reservation List

      The DHCP server allocates an IP address based on a preconfigured mapping to each client's MAC address when they are connected to the network. This is not the same thing as a static IP address, as static IP addresses are assigned manually and have to ...
    • Load Balancing Rule to use only one ISP IP

      When using Load Balancing the SimpleWAN unit will use the IP with the most optimum connection to the website, server, etc. This sometimes causes conflict with devices such as phones or computers trying to reach a secure website. In order to use only ...
    • Interfaces (LAN, WAN, WAN2)

      Within this section inside of a given site, you are able to modify settings for the LAN, WAN, and WAN2 (when applicable) for the SimpleWAN device. Please be sure to update WAN settings when moving a SimpleWAN device to a new physical location or ...
    • Dynamic IPSEC VPN Server

      Dynamic Server Alternative remote VPN; can be used by phones with remote VPN capabilities, remote desktop, etc.. The main use of dynamic vpn server is to create a Spoke and Hub Type 1 tunnel that allow users to remotely access their network and ...