VPN
A Virtual Private Network (VPN) extends a private network across a public network, such as the Internet. It enables a computer or network-enabled device to send and receive data across shared or public networks as if it was directly connected to the private network, while benefiting from the functionality, security and management policies of the private network. A VPN is created by establishing a virtual point-to-point connection through the use of dedicated connections, virtual tunneling protocols or traffic encryption. SimpleWAN devices allow you to implement an IPsec VPN.
vMPLS
vMPLS creates site to site connection that either meshes all sites or you can have one static site with all remote sites connecting to it. vMPLS Setup is much faster than traditional IPSEC.
Note: Any device connecting to the SimpleWAN VPN (i.e. Dynamic IPSEC, L2TP, or PPTP) will use the lowest number available in the LAN interface. if LAN is set 192.168.1.1, the next available IP 192.168.1.2 will be used and will increase incrementally (i.e. 192.168.1.3, 192.168.1.4, etc.) for each user using the VPN.
Is there a way to set the VPN's DHCP address?
Currently, there is no way to change the VPN's DHCP address.
Related Articles
PPTP
PPTP Settings You can enable or disable PPTP from here, and get the Dial In address. Unless you have VPN users, you should disable this for security. Please keep in mind that PPTP is being Phased Out. This VPN service has been known for breaches and ...IPSEC
IPSEC VPN can be used to create a Tunnel between devices. IPSEC settings must match on both units. For units that do not match (i.e. SimpleWAN unit to Cisco or Sonicwall) the settings between each unit is even more crucial. You may need to Switch to ...Using NCP for Dynamic IPSEC VPN connection
get the Client, please download from: (https://www.ncp-e.com/en/service-resources/download-vpn-client/) Step 1: Create a Dynamic IPSEC Server. Visuals below can be used as guidelines for your initial attempt. Make sure that the IPSEC Server is ...Dynamic IPSEC VPN Server
Dynamic Server Alternative remote VPN; can be used by phones with remote VPN capabilities, remote desktop, etc.. The main use of dynamic vpn server is to create a Spoke and Hub Type 1 tunnel that allow users to remotely access their network and ...Shrew Soft VPN
Step 1: Create a Dynamic IPSEC Server. Visuals below can be used as guidelines for your initial attempt. Make sure that the IPSEC Server is Enabled. Step 2: Create an IPSEC Key. At the bottom of the page, you will see the IPSEC Keys section. You will ...